How equipment works

Wear at work

Each hour of work takes a little condition off a machine, according to its category. The lifespan is the number of hours of work that take a new machine to a breakdown, without a repair.

Wear per hour of work and lifespan of each category
CategoryWear per hourLifespan
Tractor0.0125 %/h8,000 h
Combine harvester0.025 %/h4,000 h
Plough0.02 %/h5,000 h
Seed drill0.01 %/h10,000 h
Precision drill0.01 %/h10,000 h
Grain trailer0.005 %/h20,000 h
Sprayer0.0075 %/h13,333 h
Cultivator0.015 %/h6,667 h
Roller0.0075 %/h13,333 h
Fuel trailer0.005 %/h20,000 h
Round baler0.02 %/h5,000 h
Flatbed trailer0.005 %/h20,000 h
Front loader0.0075 %/h13,333 h
Telehandler0.0125 %/h8,000 h
Mower0.015 %/h6,667 h
Tedder0.015 %/h6,667 h
Livestock trailer0.005 %/h20,000 h
Beet harvester0.025 %/h4,000 h
Potato planter0.015 %/h6,667 h
Ridger0.015 %/h6,667 h
Potato harvester0.025 %/h4,000 h
Direct drill0.015 %/h6,667 h
Power harrow0.015 %/h6,667 h

The effect of the weather

The wear of a job depends on the weather of the moment, compared with the base wear.

Wear at work by weather, compared with the base wear
WeatherWear
Sunny100%
Cloudy100%
Rain130%
Storm180%
Drought110%

A Pro wash bay reduces the wear at work of all your equipment by 5%.

Condition tiers

The gauge shows what is left of the machine, not its wear: full, the machine is new. The word written under the gauge names its tier. A worn machine works more slowly and burns more fuel; in a set-up, the most worn machine sets the tier.

Condition tiers, with their work speed and their fuel use compared with a machine in good condition
TierCondition aboveWork speedFuel use
Good70 %100%100%
Worn40 %90%100%
Degraded20 %75%120%
Critical0 %50%150%

At the “Critical” tier, each machine you own has a 2% risk of breaking down with each hour of work.

A machine whose condition has fallen to zero is “Out of service”. A machine that has broken down no longer works until a breakdown call-out.

Working the soil

A field is prepared in one of three ways before it is sown: ploughing, reduced tillage and direct sowing. The technique is chosen in no menu: it follows from the passes made on the field since its last harvest. It is set at sowing and no longer changes until the harvest: the harvest, the herbicide sprays and the fertility all read it. The page of the field gives the current technique (“Not chosen yet” while nothing decides it), the passes done and the ones still possible, each with its effect.

The three techniques of soil preparation
TechniqueHow to get itYield obtainedLoss without a second herbicide sprayFertility lost at harvest
PloughingA ploughing since the last harvest, then a sowing.100%0%5 points
Reduced tillageA seedbed preparation without ploughing, then a sowing; or a stubble cultivation followed by a direct sowing.98%2%4 points
Direct sowingA direct sowing on a harvested field, with no pass before it.92%6%3 points

Ploughing then sowing works as always: with ploughing, the yield, the fertility and the herbicide sprays do not change. Without ploughing, the crop loses a little yield, but the field loses less fertility at each harvest and needs fewer passes. The yield obtained multiplies the one the fertility, the rotation and the care give: the crop choice counts it in its range. A hay crop keeps all its hay, whatever the technique.

Stubble cultivation is done with a cultivator, on a bare field, once between two harvests; the field stays bare. It is never compulsory: with ploughing or reduced tillage, it adds 2% to the yield of the next crop. Followed by direct sowing, it moves the field to reduced tillage, since the soil has been worked.

Seedbed preparation is done with a cultivator or a power harrow, once between two harvests. On a bare field, it makes it ready to sow without ploughing, with reduced tillage. On a ploughed field, it is optional and adds 2% to the yield. A field ready to sow, ploughed or with its seedbed prepared, is not ploughed again.

Direct sowing is done with a direct drill, on a bare field already harvested at least once, without swaths or bales of straw (chopped straw is no obstacle), within the sowing window of the crop. It sows like a sowing: the seed is taken at the start and the crop is harvested on the same date as after a sowing. Sown directly: winter wheat, winter barley, winter oilseed rape, spring barley, field peas, winter field beans and buckwheat; the other crops are sown on a ploughed or prepared field. A field never harvested is ploughed or prepared first.

Rolling is done with a roller, on a sown field, within the 30 game days after the end of the sowing, once per crop. It is optional and adds the gain of the crop, given below; a crop not listed gains nothing from it, and its rolling is refused. A hay crop is also rolled each spring, and its gain is on its hay: see “The meadow and its hay”.

Rolling gain per crop
CropGainApplies to
Winter wheat3%The yield of the harvest
Winter barley3%The yield of the harvest
Spring barley3%The yield of the harvest
Meadow4%The hay of the cuts after the rolling
Lucerne4%The hay of the cuts after the rolling

Each pass is a job like ploughing: you choose the tractor then the tool, it takes hours of work, fuel and wear, can wait in the queue of a machine, and the weather refuses or slows it like the other jobs: the Weather app tells, weather by weather, what it allows. A field that carries straw or hay is not worked.

Without ploughing to bury the weeds, a crop sown with reduced tillage or direct sowing takes a second herbicide spray, once, after the first and within the same window of care. Without it, it loses 2% of its yield with reduced tillage and 6% with direct sowing, on top of the loss of the sprays missing. With ploughing, nothing changes. Buckwheat, which takes no spray, has neither a second herbicide spray nor a loss.

Each harvest takes fertility points away according to the technique the crop was sown with: 5 points with ploughing, 4 points with reduced tillage and 3 points with direct sowing. The loss stays a loss at each harvest: chopped straw and fertilisers raise the field again as before.

The soil tools are bought at the machinery dealer, new or used, in the “Cultivation” aisle, and are pulled by a tractor powerful enough, like a plough.

Works of each soil tool
ToolWorks
CultivatorStubble cultivation, Seedbed preparation
Power harrowSeedbed preparation
RollerRolling
Direct drillDirect sowing

The contractor does the four passes with their own equipment, at their rate per hectare; for direct sowing, you supply the seed as for a sowing. An order for rolling or direct sowing whose window closes while it waits for good weather is cancelled and refunded.

Tool and contractor rate of each pass
PassToolContractor rate per hectare
Stubble cultivationCultivator€35.00
Seedbed preparationCultivator or power harrow€40.00
RollingRoller€15.00
Direct sowingDirect drill€60.00

These rates apply to a farm that crops 40 ha at most, rented fields and meadows included. Above that, every job of the contractor is marked up by 3% per hectare of the farm over this threshold, up to 200%: the order window shows the marked-up price and the area that sets it. An order keeps the price of the day it was placed, even if the farm grows before the contractor comes.

The straw machinery

A baling takes a tractor and a round baler. A collection takes a whole set of equipment: a tractor, a flatbed trailer and a front loader, or else a tractor, a flatbed trailer and a telehandler. All these machines are busy until the end of the work and wear during its hours, at the rate of their category.

The fuel follows the power of the engines at work, the time of the work and its load. With a telehandler, its engine uses fuel on top of the tractor’s.

Load of the engines during straw jobs
WorkLoad
Baling1
Bale collection0.6

A job stopped partway through, cancelled or stopped by a breakdown only counts the hours done for the fuel and the wear, and keeps its share: the bales already baled or already brought in remain so.

The hay machinery

A mowing takes a tractor and a mower, a tedding a tractor and a tedder. Both machines are busy until the end of the work and wear during its hours, at the rate of their category: a new mower lasts about 6,667 h of work without repair. The baling and the collection of the hay take the straw machinery.

The fuel follows the power of the tractor, the time of the work and the load of the implement, written on its sheet. A job stopped partway through only counts the hours done for the fuel and the wear.

The mowing and the tedding of lucerne take the same machinery as those of the meadow.

Rolled after their sowing or in spring, meadow and lucerne give 4% more hay on the cuts mown within the 12 game months after the rolling, of the same quality. The rolling is started in Fields, with a tractor and a roller or by the contractor.

Equipment during a trip

A trip takes a tractor and a trailer: they are “working” from the start to the last run, and the jobs waiting for them stay in their queue. The fuel follows the engine of the tractor, the duration of the trip and its load, higher on the loaded leg (outbound for a sale, on the way back for a purchase) than on the empty one.

Engine load during a trip
RunLoad
Loaded100%
Empty60%

At the end of the trip, the tractor and the trailer wear for its hours, at the rate of their category, without going below 1 % condition: a trip never breaks down. A trip waiting behind a machine that is broken down or under repair stays in the queue, with its fuel set aside, and leaves when the machine is back; the Transport app can also cancel it, at no cost.

The sprayer

Hitched to a powerful enough tractor, the sprayer sprays the crops and spreads fertiliser: in Fields, the “Spray” or “Spread fertiliser” window asks for the product, then the equipment. The job lasts according to the width and the speed of the sprayer, draws on today’s hours and wears the sprayer like other implements. When it is busy, it takes the job into its queue. Without a sprayer, the contractor sprays and spreads for you (help of Fields).

Working hours today

Each game day, you have 10 h of work. Every job done with your own equipment (ploughing, sowing, spraying, spreading, harvest, baling, bale collection, livestock jobs) draws on these hours as it goes: two jobs at the same time use them up twice as fast. The contractor never touches your hours.

When the hours run out, the jobs in progress are “paused until midnight”, and a “Working hours” notification tells you, once in the day. At game midnight the hours come back and the jobs carry on where they stopped. The top bar shows the hours left, and the launch window gives the start and the expected end, pauses included.

A machine carries one job in progress and, behind it, jobs in its queue, each on another field: when one ends, the next starts on its own, if the weather allows. The farm keeps 3 places in the queue of each machine, and each farm worker or seasonal worker present at midnight adds 3 places; a temp worker adds none. After someone leaves, the queue runs to its end, but takes no new job while it is at the limit of the day. The seed is taken and the fuel set aside as soon as the job is launched.

An employee adds their hours to yours (Staff app). For the day in progress, a temp worker brings 7 h for €200.00, debited when hired, and leaves at midnight: the hours they did not use are lost. The jobs waiting for hours start at once; those waiting for their machine stay in its queue. In Fields, a waiting job says why: “Machine busy”, with the number of jobs ahead of it, or “Hours used up · midnight”, when it waits for midnight.

Passive wear and the machinery shed

Even when it stands still, the equipment you own loses condition each game month. A machinery shed limits this loss.

Passive wear per game month, outside and under cover
StorageWear per game month
Outside0.5 %
Under cover0.1 %

Your machinery sheds hold as many machines as their capacity, the most expensive first. The others stay outside.

A machine working or under repair when the month turns is not affected: it loses nothing that month.

The sheets of the fleet are sorted by place, in this order: “Under cover”, “Outside”, then “Working or under repair”. The title of each group says what a month standing still costs there. The game sorts them again as soon as a machine goes to work or comes back.

Repairs

The “Maintenance” button on the sheet of a machine opens a panel with its possible repairs and their price, its insurance (take it out, cancel it or resume its renewal) and its sheet in the Wiki.

The end of an insurance, a warranty or a repair is written with its full date, game year included, followed by the game time left: in months, then in days in the last month.

A repair is paid when ordered and keeps the machine out of use for its duration, in game hours. Its cost is a share of the new price of the machine.

Condition reached, cost and duration of each kind of repair
RepairBack up toCost (share of the new price)Duration
Makeshift repair75 %5%1 h
Workshop repair90 %2%3 h
Breakdown call-out30 %10%4 h

A “Makeshift repair” is always possible. A “Workshop repair” needs a Workshop building. A “Breakdown call-out” is for equipment that has broken down, which can only be repaired afterwards.

The warranty

A machine bought new from the machinery dealer has a warranty of 3 game months. During the warranty, its wear at work is reduced by 50%.

Under warranty, a “Makeshift repair” and a “Workshop repair” are free as long as the condition of the machine is above 50 %. A “Breakdown call-out” is never covered.

Used machinery and starter machinery have no warranty. Passive wear is not reduced.